|
| PD 5015/5010 ControllersFEATURES &
256 by 64 (PD5010) &
48 keys - PD5010)
APPLICATION SYSTEM DESCRIPTION Programming The Controllers are programmed in Process-Pascal, which is an extension of standard Pascal, allowing easy declaration and utilisation of P-NET variables and objects. Programmes are developed on a standard PC, compiled and down loaded directly via a PC/P-NET interface card, or via the RS232 interface. Program code can be down loaded to FLASH memory or battery backed RAM. Memory The PD 5015/5010 has on board memory consisting of 512 Kbytes of FLASH and 512 Kbytes of lithium backed RAM. In addition, a 128 Kbyte EPROM is provided which holds the Operating System. The use of the RAM Extension Board (PD 5090), extends each of the FLASH and RAM memory capacities to 1 Mbyte.
Channels In keeping with the standardised, object orientated channel structure of other P-NET devices, the PD5015/5010 provides a structure of up to16 Channels, dealing with the configuration and use of Communication Ports, Program control, keyboard and display usage, and the digital alarm output. As with all P-NET devices, the Service channel (channel 0) provides the ability, amongst other facilities, to identify the device and to provide the means to set the node address.
Communications Interfaces The Controllers have three serial communications interfaces, configurable for PNETmode, DatamodeIn, DatamodeOut or DatamodeInOut. Two of these provide galvanically isolated RS485, multi-master, multi-net interfaces with the P-NET fieldbus, and run at the standardised speed of 76.8 Kbaud or at 9.6 Kbaud. In non PNETmode the communication channels are used to provide an interface to other communication protocols using RS485. In non PNETmode the Baud rates are adjustable between 1.2 and 76.8 Kbaud. The third is a standard RS232 interface, which has an adjustable Baud rate of between 1200 and 9600. This communications channel is used to provide an interface to printers, modems, barcode readers etc., as well as other communications protocols using this medium.
Digital Channel The PD 5015/5010 have a built in digital channel, controlling the operation of the "Alarm Output" available at the rear of the controller.
Keyboard/Display The PD 5015 provides a 44 programmable key layout ( PD 5010 providing 48 keys) using sealed, membrane switch technology. A customised self adhesive keyboard overlay can be used to provide the operator with the ideal visual interface associated with the usage of the controller. The associated display is an LCD Supertwist technology type, having a resolution of 240 by 128 pixels (PD 5010 having 256 by 64 pixels), providing adjustable contrast and wide viewing angle. An adjustable LED back light is also provided. A program controlled LED is placed in the front of the Controller.
SPECIFICATIONS Power Supply: 24V DC ± 15%, 6 watts
Operational Ambient Temperature: -10 to +45 C
Storage Temperature: -20 to +60 C
Weight: 1.5 Kg
Memory: 512 Kbytes FLASH and 512 Kbytes RAM. With extension: 1 Mbytes FLASH/1 MB RAM
Scale Drawings (mm)
PD5010 Controller PD5015 Controller
PD 5015/5010 are approved in compliance with EMC Directive No. 89/336/EEC. Test limits are determined by the generic standards EN 50081-1 for emission and EN 50082-2 for immunity.PD 5015/5010 are approved in compliance with the IEC 68-2-6 Test Fc standard for vibration.
|
Send mail to
webmaster@calm-controls.co.uk with
questions or comments about this web site.
|